German
Top items
Items 1 - 10 of 15
2.5 inch removable frame for the installation of a SAS/SATA SSD or hard-disk in a free PCI / PCIe expansion slot (full height). The robust removable frame is ideal for expanding very compact housings with an additional HDD/SSD - e.g. in mini ITX systems or 19-inch servers with 1U.
Extremely sturdy and lockable 2.5 inch removable frame for the installation of a SAS/SATA SSD or hard-disk in a free PCI / PCIe expansion slot (full height). The robust removable frame is ideal for expanding very compact housings with an additional HDD/SSD - e.g. in mini ITX systems or 19-inch servers with 1U.
High-quality 60mm case fan from Silverstone with PWM for use in server or industrial applications. This is a very good and powerful 60mm fan, which we also install in some of the complete systems we manufacture. The hydrodynamic bearing (HDB) of this fan also ensures a long service life. The 35cm long connection cable is directly connected to a short socket on the fan. Alternatively, with an included speed reduction cable, the fan can be operated in silent mode at only max. 2,850upm.
Professional 80mm chassis turbofan from Silverstone with PWM for server or industrial use. This is one of the most powerful 80mm fans we could find on the market. The dual ball bearing of this fan also ensures a long service life. Please note the special installation depth of 38mm.
High quality extended-ATX server tower chassis from Chenbro for professional applications. Basic chassis without power-supply or backplane. The case is suitable for operation with large server-mainboards (up to 12" x 13" / E-ATX), but can also be used with smaller standard mainboards (mini ITX, micro ATX, standard ATX).
Very robust and lockable M.2 NVMe SSD removable frame for the installation of an NVMe SSD in a free PCIe expansion slot (from PCIe x4 up) with full or low height. The adapter supports the installation of NVMe SSDs with 30/42/60/80mm length (M.2 2230, 2242, 2260, 2280). The removable frame is compatible with PCIe 3.0/4.0 NVMe SSDs and is ideal for the uncomplicated expansion of systems with an additional NVMe SSD. A suitable slot bracket for converting the removable frame to a low-profile installation height is included.
New
LGA1700
Very compact aluminium heat sink from Silverstone with active fan. Suitable for 19-inch systems and servers with 1U (height units) as well as other confined environments. The heat sink is mounted by screwing it into two enclosed self-adhesive base plates with threads, which need to be attached underneath the mainboard. Suitable for intel processors with socket LGA1700 (‘Alder Lake/Raptor Lake’ / 12th/13th/14th gen) and a max. TDP of up to 95 watts.
Dual Mini Backplane for the installation of two 2.5 inch SAS/SATA hard disks or SSDs in an internal 3.5 inch drive bay. The backplane is ideally suited for setting up a RAID-1 array in a small PC case (e.g. HTPC, Miniserver). The frame is completely made of robust metal and can accommodate HDDs and SSDs up to a maximum height of 9.5mm each.
Mini-backplane for the installation of up to four 2.5" SAS or SATA I/ II/III hard drives in one internal 5.25" drive bay.
With the RM14300, Chenbro offers a high quality 19" enclosure with a depth of only 41cm and 1U, which is suitable for use with mini ITX and micro ATX mainboards. The enclosure can also be installed rotated by 180 degrees so that the rear ports of the mainboard are accessible from the front.
Items 1 - 10 of 15